BIQUPanda Jet Fan Duct for Bambulab P1S/P1P/X1C/X1E 3D Printers, Print Head Fan Duct, Larger Air Flow, Effective Cooling, Compatible with Stock Hotend and Panda Revo/Flow

I don’t love the original screen on the Bambu Lab P1S, but this changed all that. It looks good and provides all the same functionality as the original in a more user friendly way. It’s a small price to pay for a product that makes my printing easier and more enjoyable.

highly recommend this screen. so much easier to see and use than the small one that comes with the P1S. It honestly makes it feel like a completely different printer, looks fantastic and super high end. Hooks up super fast and the ability to take it with you and connect to multiple printers is huge. I have an A1, A1 mini and P1S and it works flawlessly.

The screens turns on and off constantly. screen is scrambled. It worked at first and I liked it. amazon no help. bigtree just a typical china company. I do not recommendUpdate. Issue was that P1s did not supply enough voltage for screen. Using a wall charger and it works perfect. They should not say that you can plug into USB port on printer board

A few months ago I built my own remote printer monitor using an open source software called xTouch. The reality is I ended up never using it because the screen quality was really poor and I didn't want to invest a bunch of time and money trying to build something better. You can see the devices together in one of my photos for comparison.Then I discovered the Panda Touch. At first I wasn't really sure it was for me because folks often buy it as an upgrade to the P1P or P1S. I decided to buy one and try it for myself when I discovered that it supported all Bambu printers and even multiple printers at the same time.What I love!I use the Panda Touch on my work desk as a way to monitor my A1 Mini and my X1C. It has a very clean and crisp display making it is really easy to read. It is also a touch screen that is highly responsive and may even be a tad more responsive than the display on the X1C.I prefer purpose built and dedicated devices over all of the switching apps on my phone or PC. With the Panda I never have to open my phone and wait for the Bambu Handy app to load just so I can check the progress of a print. I can just tap the screen if it has gone to sleep. (Which is a configurable setting) It is a completely frictionless and familiar experience. It feels like I detached my X1C display and am now able to use it with both of my printers. (This device has a magnetic attachment to its base, so you can even detach it and run it wireless for up to 30 minutes)I have been using the device for about a week and I have found that I can monitor and control nearly everything for both printers. The display is a huge upgrade over the A1 Mini so I use it to configure my filament types and colors. The larger screen makes it easier to work with and the navigation options feels similar to my X1C display.The setup process is very well done and will automatically discover your printers once connected to your Wifi network.Any errors or warning that I would normally see on the printers show up on the Panda Touch so I don't have to get out of my chair to see what might be going on when I hear a machine stop printing.They include a little ducky in the box!Print from USB: One feature I have not yet tried is printing directly from USB. They included a USB port and this capability directly into the device. I was talking with my local library about this because they have a need to print from USB and The A1 Mini does not have a USB port. I don’t know that I will personally use this feature, but it is a great bonus feature and for some may be exactly the feature they need.Tips: The device shipped with an older firmware. I looked up how to update it was so easy I was able to update it via the browser on my phone. I have never had a device firmware update that was this easy before.Hopes for future firmware enhancements: I would like to be able to select the filament pressure setting since I have done the filament calibrations for some of my most used filaments and I am able to select it on the printers. I would also love to see an image of what is printing on the home screen. I love that feature on the printer displays.

You won't see an insane improvement to part cooling, but it was VERY noticeable on silk PLA. Issues id usually have with certain overhangs on silk seemed to improve markedly between the stock cooling duct and the Panda Jet.The installation was a bit tedious because it wasnt as straight forward as the instructions showed. I did have to chip away some glue from the toolhead cover to be able to release the old duct, but installation of the Panda Jet was smooth and it's held up through 50 hours of printing since I received it.Overall a great product that is worth the investment to make the Bambu Lab X1C print just a little better.

I have tried a million different things but it won't connect to wifi. Even if I could get it to connect to wifi(I tried old networks and newer ones but just won't connect). It also requires you to enter a ton of details for every single printer you have which would take ages and the IP address might change making you enter it again. I wanted it for a print farm but for this isn't not helpful entering all that information. The touch screen doesn't work well either. There is no reason you have to do this. Orca slicer logs in and pulls all your printers automatically there is no reason they couldn't do the same or just scan the subnet its on and pull all the printers then maintain the connection based on the MAC address.

I'll start by saying that you're not going to see crazy results swapping to the panda jet. I think it's necessary to set expectations for what a single fan is capable of even if changing the ducts. Now I will say if you're trying to get every ounce of performance from your machine this is 100% worth the upgrade. Now that I gave that little disclaimer let's talk numbers. I did three overhang test for each duct using the exact same print settings. Essentially I would print one of the test and then just press print again. After getting three samples on the stock duct I quickly swapped in the panda and click print again that way the only difference in this test was just the duct. Fan was running at 100% and essentially here are the results:The stock duct gave me a clean 40° overhang with the 50° marker being about halfway decent but not quite perfect. Not badThe Panda duct gave me a clean 50° overhang with a 60° being about halfway decent. A 10° performance boost in overhangs isn't crazy but definitely not bad if you're trying to get the max performance.Like stated it's not a crazy difference but to be honest even the rest of the overhangs look a lot better using the panda than the stock one did. I uploaded a picture of the results from the best samples.

This was a must upgrade for the P1S. Super easy to install and setup.

We've replaced the stock ducts with these on all 5 of our machines and would do it again in a heartbeat. They definitely improve overhangs and unlike the stock fan, it doesn't matter how parts are oriented on the bed.They are not the easiest to install and do require picking away at the resin that holds the stock fans on,

It’s decent but you can do the same thing with an old iPod touch or similar. It is useful but it would be better if it had the live camera feed. Ah well. Not worth returning. Makes more sense if you have multiple printers. It works, it’s just kind of limited and doesn’t really give you much more. Better off using a tablet with the Bambu app.

Purchased two to test with, before upgrading my other bambu printers..... Built in magnets where not glued in and the cover was ejected/yeeted causing the print to stop and damaged both the print and housing.Is it worth it ? not really, I lost trust in this product. I need reliability!

Can't print files from usb or local. Assuming it's just need a firmware update. So waited for months now. They updated to add in functionality for their other stuff and haven't fixed anything. When I bought this I assumed that it will be working at least what was advertised.